วันอังคารที่ 28 กุมภาพันธ์ พ.ศ. 2555

Trail Finder 1/10 4x4 Off-Road Scale Truck Kit (Red) Part Number Z-K0024

RC4WD 1/10 4x4 Trail Finder Scale Truck Kit (Red)
Trail Finder comes with Mirek scale heavy duty rail frame and delrin ultra flex leaf springs. With built in shock mounts, these CNC machined frame is designed to deliver solid performance, rather you are doing hauling, towing, offroading or rock crawling. You'll also find R2 2 speed transmission and D35 scale axles in every Trail Finder. These heavy-duty axles are built for durability and scale.
  • CNC machined scale rail frame
  • D35 scale aluminum axle
  • R2 2 Speed transmission
  • Alum electronic mounting plate
  • Alum 1.55" wheel and scale tires
  • White scale shocks
  • Heavy Duty Punisher Shaft
  • Full metal steering kit (both front and 2 speed)
  • Billet front & rear body mounts
  • Delrin leaf springs
  • Steel shackle, leaf end
  • Full ball bearings
  • Heavy duty nylon strap lock for battery (2) (X-0392)
  • Length: 435mm/17.13inch, Width: 81mm/3.2inch, Height: 143mm/5.63inch, Wheelbase: 280mm/11.02inch, Axle ground clearance: 29mm/1.14inch, Middle ground clearance: 75mm/2.95inch
  • Designed in Europe (UK & Poland), manufactured by RC4WD





What's included:
  • 1x RC4WD 1/10 Trail Finder Kit (Red)
Requires: 1x 1/10 Truck Body (Lexan or Plastic), 1x 540 motor (part # X-0379), 1x ESC, 1x 3-channel Radio, 2x servo, 1x battery and 1x charger.
Electronics Equipment needed:
1x Big Offroad 2.4Ghz 3-Channel Radio * Receiver (Part # Z-R0002)
1x Mayhem Crawler Speed Control (Part # X-0501)
1x Boost Crawler 50T Motor (Part X-XXXX)
2x Mayhem High Torque Standard Servo (Part # X-0502)
Below are additional optional upgrade you can buy for your Trail Finder:
Diff Cover:
Hardcore Black Diff Cover (Part # Z-S0006)
TBK Red Diff Cover (Part # Z-S0003)
Gear Reduction:
4:1 Gear Reduction Unit (Part # X-0245)
3:1 Gear Reduction Unit (Part # X-0469)
2:1 Gear Reduction Unit (Part # X-0355)
Shock Boots:
Red Scale Shock Boots [X-0399]
Black Scale Shock Boots [X-0403]
Blue Scale Shock Boots [X-0402]
Yellow Scale Shock Boots [X-0401]
Green Scale Shock Boots [X-0075]
Skid Plate & Bumper:
Center Tranny Skid Plate (Part # Z-S0001)
3 Links Upgrade (More articulation):
D40 or Yota 3 Links upgrade (Part # X-0425)
Suspension Shocks:
Red Soft Leaf Spring (Part # X-0436)
Delrin Leaf Spring (Part # X-0441)
Leaf Spring Helper (Part # Z-S0052)
Dual Spring 90mm Scale Shocks (Part # X-0408)
Note: Leaf Spring helper will add stability and avoid soft leaf spring from twisting
Wheel related:
Trail Finder Wheel Widener (Part # Z-S0031)
Portal Axle:
D40 Portal Axle (Part # X-0348)
Lubrication (Reduce gear noise, for axle, gearbox):
Monster Lubrication Oil (Part # X-0317)
Lightning System:
The Scale Lightning System (Part # X-503)
This truck require 5-6 hours of build time.
D40 axle comes with a spool gear. For differential, please purchase Tamiya F-350 parts.
Tamiya Part # for the scale toyota body:
- 9335488 Hilux rear body
- 9335487 Hilux front body
- 9225104 T parts / windows
- 9115198 N parts / bumpers and headlight buckets
- 9005869 D parts / side mirrors and roller light grills
For more information about Trail Finder, please visit our dedicated Trail Finder Forum
เขียนโดย ที่ 1 ความคิดเห็น:
ป้ายกำกับ:

Trail Finder 1/10 4 Link Truck Kit (Red) Part Number Z-K0021

RC4WD 1/10 4x4 Trail Finder 4 Link Truck Kit (Red Edition)
Trail Finder 4 Link Truck is our most advanced scale truck for additional articulation. With built in shock mounts, these CNC machined frame is designed to deliver solid performance, rather you are doing hauling, towing, offroading or rock crawling. You'll also find R2 2 speed transmission and D35 narrow scale axles in every Trail Finder. These heavy-duty axles are built for durability and scale.
  • CNC machined scale rail frame
  • D35 narrow scale aluminum axle
  • R2 2 Speed transmission
  • Alum electronic mounting plate
  • Alum 1.9" steel beadlock wheel and scale tires
  • White scale shocks
  • Heavy Duty Punisher Shaft
  • Full metal steering kit (both front and 2 speed)
  • Billet front & rear body mounts
  • Katan 4 link suspension system
  • Steel shackle, leaf end
  • Full ball bearings
  • Heavy duty nylon strap lock for battery (2) (X-0392)
  • Length: 435mm/17.13inch, Width: 81mm/3.2inch, Height: 143mm/5.63inch, Wheelbase: 280mm/11.02inch, Axle ground clearance: 29mm/1.14inch, Middle ground clearance: 75mm/2.95inch
  • Designed in Europe (UK & Poland), manufactured by RC4WD







What's included:
  • 1x RC4WD 1/10 Trail Finder 4 Link Truck Kit (Silver)
Requires: 1x 1/10 Truck Body (Lexan or Plastic), 1x 540 motor (part # X-0379), 1x ESC, 1x 3-channel Radio, 2x servo, 1x battery and 1x charger.
Electronics Equipment needed:
1x Big Offroad 2.4Ghz 3-Channel Radio * Receiver (Part # Z-R0002)
1x Mayhem Crawler Speed Control (Part # X-0501)
1x Boost Crawler 50T Motor (Part X-XXXX)
2x Mayhem High Torque Standard Servo (Part # X-0502)
Below are additional optional upgrade you can buy for your Trail Finder:
Diff Cover:
Hardcore Black Diff Cover (Part # Z-S0006)
TBK Red Diff Cover (Part # Z-S0003)
Gear Reduction:
4:1 Gear Reduction Unit (Part # X-0245)
3:1 Gear Reduction Unit (Part # X-0469)
2:1 Gear Reduction Unit (Part # X-0355)
Shock Boots:
Red Scale Shock Boots [X-0399]
Black Scale Shock Boots [X-0403]
Blue Scale Shock Boots [X-0402]
Yellow Scale Shock Boots [X-0401]
Green Scale Shock Boots [X-0075]
Skid Plate & Bumper:
Center Tranny Skid Plate (Part # Z-S0001)
Portal Axle:
D40 Portal Axle (Part # X-0348)
Lubrication (Reduce gear noise, for axle, gearbox):
Monster Lubrication Oil (Part # X-0317)
Lightning System:
The Scale Lightning System (Part # X-503)
This truck require 5-6 hours of build time.
D40 axle comes with a spool gear. For differential, please purchase Tamiya F-350 parts.
Tamiya Part # for the scale toyota body:
- 9335488 Hilux rear body
- 9335487 Hilux front body
- 9225104 T parts / windows
- 9115198 N parts / bumpers and headlight buckets
- 9005869 D parts / side mirrors and roller light grills
For more information about Trail Finder, please visit our dedicated Trail Finder Forum
เขียนโดย ที่ ไม่มีความคิดเห็น:
ป้ายกำกับ:

Trail Finder 1/10 Scale 4 Link Truck ARTR (Jeep Edition)

Trail Finder 4 Link 1/10 Scale Off-Road Truck Kit (Jeep Edition)

TF Jeep edition is a full metal scale truck designed for the Tamiya Jeep Body, equipped with our new D35 narrow scale axles! Now available with 4 link suspension setup for additional articulation!
 

  • Billet Jeep edition chassis
  • D35 Narrow axle
  • R2 Single speed transmission
  • Punisher steel shaft
  • Billet 4 link suspension setup
  • Billet scale white shocks
  • OEM Stamped beadlock wheels
  • Scale 1.9 tires
  • Steel body posts
  • Full ball bearings 
  • Length: 362mm/14.25inch", Width: 210mm/8.267inch", Height: 140mm/5.511", Wheelbase: 237mm/9.33 inch"







    Photos to show the chassis with Jeep body and Tamiya LandCruiser Body



    What's included:
    • 1x RC4WD Trail Finder 4 Link Jeep Edition Kit

    Requires: 1x ESC & Motor (part # X-0125), 1x 2/3 channel Radio (part # X-10001), 1x servo (part # X-0502), 1x battery, 1x charger and 1x Tamiya Jeep body

    This truck will require 4-8 hours of build time.
    Instruction Manual:
    Not available yet....
    International customers (Non US)
    If you plan to order this kit, make sure you choose DHL/EMS as shipping method.
    Optional Upgrade
    Hardcore Diff Cover (Part # Z-S0006)
    Rok-Trac Diff Cover (Part # Z-S0004)
    TBK Diff Cover (Part # Z-S0003)
    Optional scale shock boots
    Black shock boots (Part #X-0403)
    Blue shock boots (Part #X-0402)
    Green shock boots (Part #X-0075)
    Red shock boots (Part #X-0399)
    Yellow shock boots (Part #X-0401)
    Important Note:
    This is a prepacked kit straight from our factory, changing tire or wheel type is not possible.
    Trail Finder Fans Forum
    เขียนโดย ที่ ไม่มีความคิดเห็น:
    ป้ายกำกับ:

    Trail Finder 1/10 4x4 Off-Road Scale Truck Kit (Silver) Part Number Z-K0020

    RC4WD 1/10 4x4 Trail Finder Scale Truck Kit (Silver)
    Trail Finder comes with Mirek scale heavy duty rail frame and delrin ultra flex leaf springs. With built in shock mounts, these CNC machined frame is designed to deliver solid performance, rather you are doing hauling, towing, offroading or rock crawling. You'll also find R2 2 speed transmission and D35 scale axles in every Trail Finder. These heavy-duty axles are built for durability and scale.

    • D35 scale aluminum axle
    • R2 2 Speed transmission
    • Alum electronic mounting plate
    • Alum 1.55" wheel and scale tires
    • White scale shocks
    • Heavy Duty Punisher Shaft
    • Full metal steering kit (both front and 2 speed)
    • Billet front & rear body mounts
    • Delrin leaf springs
    • Steel shackle, leaf end
    • Full ball bearings
    • Heavy duty nylon strap lock for battery (2) (X-0392)
    • Length: 435mm/17.13inch, Width: 81mm/3.2inch, Height: 143mm/5.63inch, Wheelbase: 280mm/11.02inch, Axle ground clearance: 29mm/1.14inch, Middle ground clearance: 75mm/2.95inch
    • Designed in Europe (UK & Poland), manufactured by RC4WD







    What's included:
    • 1x RC4WD 1/10 Trail Finder Kit (Silver)

    Requires: 1x 1/10 Truck Body (Lexan or Plastic), 1x 540 motor (part # X-0379), 1x ESC, 1x 3-channel Radio, 2x servo, 1x battery and 1x charger.
    Electronics Equipment needed:
    1x Big Offroad 2.4Ghz 3-Channel Radio * Receiver (Part # Z-R0002)
    1x Mayhem Crawler Speed Control (Part # X-0501)
    1x Boost Crawler 50T Motor (Part X-XXXX)
    2x Mayhem High Torque Standard Servo (Part # X-0502)


    Below are additional optional upgrade you can buy for your Trail Finder:
    Diff Cover:
    Hardcore Black Diff Cover (Part # Z-S0006)
    TBK Red Diff Cover (Part # Z-S0003)
    Gear Reduction:
    4:1 Gear Reduction Unit (Part # X-0245)
    3:1 Gear Reduction Unit (Part # X-0469)
    2:1 Gear Reduction Unit (Part # X-0355)
    Shock Boots:
    Red Scale Shock Boots [X-0399]
    Black Scale Shock Boots [X-0403]
    Blue Scale Shock Boots [X-0402]
    Yellow Scale Shock Boots [X-0401]
    Green Scale Shock Boots [X-0075]
    Skid Plate & Bumper:
    Center Tranny Skid Plate (Part # Z-S0001)
    3 Links Upgrade (More articulation):
    D40 or Yota 3 Links upgrade (Part # X-0425)
    Suspension Shocks:
    Red Soft Leaf Spring (Part # X-0436)
    Delrin Leaf Spring (Part # X-0441)
    Leaf Spring Helper (Part # Z-S0052)
    Dual Spring 90mm Scale Shocks (Part # X-0408)
    Note: Leaf Spring helper will add stability and avoid soft leaf spring from twisting
    Wheel related:
    Trail Finder Wheel Widener (Part # Z-S0031)
    Portal Axle:
    D40 Portal Axle (Part # X-0348)
    Lubrication (Reduce gear noise, for axle, gearbox):
    Monster Lubrication Oil (Part # X-0317)
    Lightning System:
    The Scale Lightning System (Part # X-503)

    This truck require 5-6 hours of build time.

    D40 axle comes with a spool gear. For differential, please purchase Tamiya F-350 parts.
    Tamiya Part # for the scale toyota body:
    - 9335488 Hilux rear body
    - 9335487 Hilux front body
    - 9225104 T parts / windows
    - 9115198 N parts / bumpers and headlight buckets
    - 9005869 D parts / side mirrors and roller light grills
    For more information about Trail Finder, please visit our dedicated Trail Finder Forum
    VIDEO

    เขียนโดย ที่ ไม่มีความคิดเห็น:
    ป้ายกำกับ:

    Trail Finder 2 Truck Kit w/Mojave Body Set Part Number Z-K0042 









    Adventures can happen anywhere. Nothing will give you more fun in the sand, dirt, snow, or mud than the Trail Finder 2. 
Part scale truck, part adventurer, your TF2 is ready for your mud kicking trail-loving lifestyle!
The TF2 has both detailed styling and aggressive performance. You will find a balance of capability and performance built into every TF2. 
Performance of the TF2 is smooth and with its 2 speed selectable transmission, 4WD drivetrain, bullet-proof transfer case and quality metal components throughout. 
The TF2 is truly a work of art in both appearance and performance.
Every TF2 is compatible with a full range of option and performance parts designed to enhance the performance 
and add to the scale look of the only true scale 1/10 offroad truck... The Trailfinder 2. Your adventure awaits....

Custom Designed for True-to-Scale Looks
Realistic Billet Aluminum Ladder Frame Chassis
2 Speed Remote Selectable Transmission
Center Mounted Realistic 4x4 Transfer Case
Cast Metal Axles with Locked Differentials
True to Scale Leaf Spring Suspension
Highly Detailed Body with Dropped Bed and More
1.55 Stamped Steel Beadlock Wheels with Lug Nuts
Super Grip High Performance Mud Thrasher Tires
Realistic Tube Bumpers - Rock Rails - Skid Plate







    All New Hammer Transfer Case
Ratio - 1.47:1 Gears - Wide 32P steel gears Features - 8 bearings, cast casing, hardened gears

All New R3 2 Speed Transmission
Ratios Pinion/spur 14/64 = 4.57:1 1st gear
3.47:1 2nd gear 1.27:1
Gears - Wide steel 32P, Delrin spur, slipper clutch,
Features - Machined billet aluminum casing, scale looking, Motor mount can be rotated to 10 different positions, 
compatible with other brand spurs (Axial, Traxxas, Robinson)

Cast Yota Axles
Ratio: 15/40 = 2.67:1 Width at hex (using 4mm TF2 hexes): 176.5mm

All New Trailfinder 2 Chassis
Features - Billet aluminum constriction Adjustable shock hoops

Driveshafts
High quality plastic material, very durable High quality steel Yokes

Wheels
Name: 1.55 OEM beadlock wheels Hub: 12mm hex Width: 22mm Back spacing: 9mm
Features: Stamped steel, aluminum hub, internal beadlock, very scale looking, 6 bolt pattern,

Bumpers
Tough Armor TF2 Winch front bumper Tough Armor TF2 Rear Bumper Tough Armor TF2 Side Sliders Authentic 
looking crawler style tube bumper. Very high quality flexible plastic, very durable, very scale.

TF2 Truck Dimensions
Wheels base: 287mm (11.3") Width:
215mm (8.5") Height: 210mm (8.25")
Ground clearance: 57mm (2.5")
Final Drive Ratios: 1st - 62.1:1, 2nd - 22.75:1


    DRIVETRAIN

The TF2 includes the new Hammer Transfer Case. Packed with detail, the case features a cast metal exterior and the same 
new 32P widened gears for durability.

The most scale accurate axles on the market, the RC4WD Cast Yota axles feature innovative round knuckles, 
new lower mounting points and compact offset pumpkins.

The All New R3 2 speed transmission comes with a fully machined billet aluminum case and new wider gears to allow for more abuse along with a 
Delrin spur with slipper clutch. The new designed motor mount is adjustable in 10 positions.

Drawing on the success of the RC4WD MOA gear sets, the TF2 drivetrain has the most durable 
gears RC4WD has to offer so the TF2 will stay on the trail, day after day.

The Driveshafts for the TF2 are an all new design featuring bulletproof steel universals and a new high quality plastic shaft 
for great driveline angles and durability on the trail.










    SUSPENSION

The TF2 includes a set of RC4WD Ultimate Scale Shocks. Designed for ultimate scale looks and ultimate performance. 
Machined from billet aluminum, rebuildable and internally sprung.

The TF2 includes a set of RC4WD White Stamped Steel 1.55 internal beadlock wheels. Super tough paintable white finish, 
aluminum internal ring and popular 6 lug design.

The TF2 Chassis features a molded fuel cell that doubles as an electronics storage box plus an aluminum, frame-mounted 
under cab electronics tray for multiple electronics mounting options.

The All New TF2 Chassis is a machined billet alumi- num ladder frame design with leaf springs, scale shock hoops, 
chassis servo mounts and hard body mounts. 4-link conversion available soon!

Every TF2 needs a tough set or rock grabbing tires and the included Mud Thrashers in X3 Compound deliver 
the traction as well as perfect scale looks in just the right size.











    DETAILS

The TF2 Mojave body features new late model style square headlights, chrome bumpers and a redesigned shape of the classic 4x4 body style. 
More accurately proportioned and better details.
Another industry first, the TF2 Mojave Body Set includes a bolt on, scale accurate molded cab back with every kit so 
you can use just the cab for a truggy style build.
The Mojave Body Set includes add on windshield wipers, mirrors, marker light details and door handles for the ultimate in scale looks. 
These items are also easily replaceable if damaged.
The TF2 Mojave Body Set includes an industry first dropped bed molded directly into the body. 
Perfect for carrying all you scale accessories or spare wheel and tire.
The Trailfinder 2 kit also includes all new scale rock rails plus front and rear tube rock guard bumpers. 
The front bumper has a winch mount built right in for an optional RC4WD winch.









    What's included:
    • 1x Trail Finder 2 Truck Kit w/Mojave Body Set
    This is a kit that requires building time (appro. 2-3 hours) and electronics.
    Required to Complete:
    Truck Kit
    Body Kit
    • Modeling / Craft Knife
    • Curved Lexan Scissors  (V-RCE7045)
    • Body Reamer  (V-RCE7035)
    • Side Cutters
    • Instant glue / Plastic Cement  (prefer non whitening)
    • Hex Drivers (1.5mm, 2mm)
    • Cross Phillips Screwdrivers (small)
    Electronics
    Hopups: 
    Items of Interest: (not required for completion)
    Additional Notes for assembly:
    Note for Body assembly  (Download Here)
    Note for Axle assembly  (Download Here) Ver 1. (Download Here) Ver 2.
    Note for Shock mounting  (Download Here)
    Instruction Manuals
    Trail Finder 2 Kit Instructions  (Download Here)
    Mojave Body Kit Instructions  (Download Here)
    Press Information:
    Download Press Release Here
    เขียนโดย ที่ ไม่มีความคิดเห็น:
    ป้ายกำกับ:
    สมัครสมาชิก: บทความ (Atom)